VALVULAS Y REPUESTOS

PNEUMATIC ACTUATOR

Ci spiace, ma questo articolo è disponibile soltanto in English e Español.

Pneumatic drive for knife gate valves. The pneumatic cylinders of our valves are manufactured and assembled in our own facilities. The maintenance of these cylinders is simple, if an element needs to be replaced, if you have any questions, contact CMO Valves. Below is an exploded image of the pneumatic drive and a listing of the cylinder components.

The upper cover and support cover are usually made of aluminum, but from pneumatic cylinders larger than Ø200 mm, they are made of nodular cast iron GJS-400.

Do you need any component of your pneumatic actuator?

Buy spare parts online for this pneumatic actuator

Maintenance

The usual maintenance kit includes: the bushing with its seals and the scraper, if the customer wishes, the plunger is also supplied.

 

Tamaños

From DN50 to DN600

Pressioni di lavoro

– Presión de utilización máxima: 10 bar.
– Presión de trabajo estándar: 6 bar.
– Fluido de trabajo: aire, calidad según ISO8573-1 Grado 5.4.2 para aplicaciones estándar.

Applicazioni industriali

Accionamiento neumático lineal, doble efecto, especialmente diseñado para la actuación y control de las válvulas y compuertas de CMO Valves:

Industria papelera, Minería, Plantas químicas, Presas y proyectos hidrológicos, Bombeos, Industria alimentaria, Tratamiento de aguas residuales

Descargar documentación técnica

Catalogo

Descargar manual

  • 50 50
  • 50/100 50/100
  • 65 65
  • 80 80
  • 100 100
  • 125 125
  • 125/150 125/150
  • 150 150
  • 200 200
  • 250 250
  • 300 300
  • 350 350
  • 400 400
  • 450 450
  • 500 500
  • 600 600
Svuota
Cantidad
+
-
¿Quieres añadir un accesorio?

Prodotti correlati