Penstock – Serie GI

Product description

Tilting weir gate

• Tilting gate that turns on a horizontal shaft at the bottom of the channel.
• Panel design with side wheels, to guide the panel throughout its run.
• Option of 3- or 4-side seal.
• Design of rectangular or square gate.
• Various sealing materials available.
• To install embedded in concrete or mounted on walls with chemical or expansion anchors.

Utilization

The tilting or folding gate controls the water flow in channels, rivers or reservoirs. It consists of a valve gate that can tilt or fold around a horizontal shaft to regulate the water level and flow. By adjusting the gate angle, operators can precisely manage the water discharge and maintain the required water levels, both upstream and downstream.

This type of gate is often used in irrigation systems and in flood control and water treatment facilities to ensure flexible, efficient water management.

• Water treatment plants
• Irrigation
• Hydroelectric power stations.
• Conduits

Sizes

From 500 x 500 up to 3000 x 3000

* Larger sizes on request.

For the general dimensions of a specific GI tilting gate, check with CMO Valves.

Working pressures

Maximum working pressure adapts to the needs of the customer in every project. These gates are designed to comply with working conditions in the place of installation.

Directives

APPLICATION OF EUROPEAN DIRECTIVES
(See document of EUROPEAN DIRECTIVES APPLICABLE TO CMO VALVES)

Download technical documentation

> Sheet product > Catalogue > Maintenance manual