Knife Gate Valve – Serie T

Product description

Unidirectional LUG type Knife Gate Valve

– One-piece cast body, with interior slides for optimum movement of the knife during operation.
– Provides high flow rates with low pressure drops.
– Various constructions materials and seal and stuffing materials available.
– Stainless steel gate.
– Face-to-face distance in accordance with MSS -81 standards.
– An arrow is marked on the body indicating the flow direction.

Utilization

This knife gate valve is suitable for working with liquids with a maximum solids concentration of 10%. If used for solids, it should be installed with the body arrow indicating the direction of flow in the opposite direction

Designed for applications such as:

• Paper industry.
• Mining.
• Chemical plants.
• Pumping.
• Food industry.
• Water treatment.

Sizes

De DN50-2″ to DN1200-24″

*Larger sizes on request.

Working pressures

• DN50‐2″  –  DN600‐24″ = 10 bar
• DN700‐28″ –  DN800‐36″ = 6 bar
• DN900‐40″ –  DN1200‐48″ = 4 bar

Indicated work pressures will only be valid following the direction of the arrow marked on the valve. Due to the valve’s design with gate support guides, 30% of these pressures can be applied in the opposite direction to the arrow without causing any damage to it. In these circumstances the valve is not watertight. An additional series of supports is necessary in order to achieve tightness in these conditions.

Directives

APPLICATION OF EUROPEAN DIRECTIVES
(See document of EUROPEAN DIRECTIVES APPLICABLE TO CMO VALVES)

Download technical documentation

> Sheet product > Catalogue > Maintenance manual